Birthday present – Miz Mozelle

I was lucky enough to be able to visit my baby sister for her birthday this year, and I made her a dress for the occasion.

4

This is the Miz Mozelle from Jamie Christina.

I used a blue textured rayon, and jazzed it up with a bit of Japanese cotton bias binding. The cotton was swiped from fabric the Fashion Critic chose, for me to make into a shirt for him. Luckily we bought plenty so I think he’ll still get his shirt.

I think the rayon suits the blousy top.

7

The wrinkles are because it came straight from my suitcase.

It has an elastic waist so it’s a good choice if you’re likely to be eating birthday cake.

cake.jpg
We were.

Details:

  • Pattern: Miz Mozelle dress by Jamie Christina
  • Fabric: textured rayon from the Fabric Warehouse, cotton trim from Japan
  • Alterations: made one size bigger in the bodice and sleeves since the pattern is for a knit and I used a woven
  • Next time: don’t bother upsizing for a woven, there’s lots of room
  • More versions: herehere, here, here, PatternReview

Welcome to the family, little Lotus

Let me begin by putting this on the record: I am not a sewing machine collector, nor do I want to be a sewing machine collector. I’ve seen how easily it can happen: you start with a gateway sewing machine like the one I’m about to show you, and before you know it you have a regular habit, you spend all your free time trying to find your next hit, and you have no money. You do have awesome clothes, though.

lotus blog

I found this beautiful little darling on Trademe, which is like Ebay for New Zealanders, but better because the population is so small there’s less competition. Closed, she measures 30 x 24 x 12cm. For those who use imperial units, that’s equivalent to tiny.

lotus open blog

Isn’t she the loveliest thing you’ve ever seen? She weighs just 6kg. That’s less than half the weight of my trusty Bernina, and it means that Bernina never has to travel again.

She’s a marvel of design, with her accessories case tucked under her lid.

accessories lotus

In fact she’s so famous for her design that her cousin’s in the Museum of Modern Art in New York (truly!). This model is the SP, which does a straight stitch, zig-zag and a buttonhole.

controls lotus

foot lotus

My little Lotus doesn’t know it yet, but she’s about to become a well-travelled young lady, as there are several sewing events coming up. I’d hate to damage her, so I decided she needed a nice case to take travelling.

I had just the thing in the stash, a length of heavy Ikea cotton from when I decided to make shoes a few years ago (I never did make shoes). I couldn’t find the right pattern online, so I made it up, and it was actually pretty easy. I’ll put directions below, in case anyone’s interested, but here’s the final product.

front lotus

end lotus

It has a pocket for the cables and pedal:

pocket lotus

And D-rings at each end for a shoulder strap (I used a strap from an old handbag):

d-ring lotus

And a pocket inside for its little manuals:

lining lotus

I’m so pleased with it! I can’t wait to take little Lotus on an outing.

Here’s how I made it, in case you want to make your own version. The measurements below fit a machine measuring 30cm wide, 24cm high and 12cm deep. They can easily be adapted.

I cut out:

  • Two pieces for front and back, adding 2cm ease plus 1cm seam allowance to each (so, 34 x 28cm each) – cut two in lining also.
  • One long piece to wrap around the bottom and about halfway up each side, plus ease and seam allowance (16 x 60cm) – cut one in lining also.
  • Two narrow pieces to go on each side of the top zipper. These extend across the top and halfway down each side, plus ease and seam allowance (9 x 60cm each) – cut two in lining also.
  • One outer pocket piece, the width of the front piece and about two thirds the height (34 x 17cm)
  • Two straps (9 x 46cm, then folded into three lengthways and topstitched)
  • Two pairs of little triangles, for the triangular flaps at each end of the zipper. Mine were about 6cm along the longest side
  • Optional interior pocket in lining fabric, mine was about 20cm square

Notions:

  • Top zip, 58cm. You’ll want a top zip that extends a good way down each side, otherwise you won’t be able to get the machine in and out. Use a plastic zip, because a metal one will scratch.
  • Front pocket zip, 32cm
  • Old blanket for batting (optional)
  • Two D-rings (optional)
side and bottom construction

The back piece, and the long bottom piece

Cut out all the pieces. If you’re using batting, cut batting pieces that are 1cm smaller than each of the outer pieces, and quilt them on, before assembling.

quilting lotus

Attach the pocket (with front zip) to the front piece. Sew the top zip between the two top pieces. Attach the little triangles at each end of the top zip.

front and top construction

the top pieces (with zip inserted) and front piece (with pocket applied)

You can probably work out the rest: sew the shell together in the way that feels right to you. I sewed the ends of the long top and bottom pieces together, forming a giant loop, and then sewed the front and back pieces in place. Don’t forget to insert the D-rings below the little triangles, if you’re using them. I used a doubled-up piece of green ribbon to attach the D-rings but you could use a piece of heavy fabric, or whatever you have to hand. Once the outer shell is all together, sew on the handles.

Then sew the lining the same way as the shell, but leave out the zip: instead, fold and press 1cm along the long side of each top piece (you’ll handstitch it to the inside of the zip at the end). Sew the interior pocket to the right side of the lining, if you want one. Put the lining inside the shell, wrong sides together, and handstitch the lining to the inside of the zip. Enjoy!